Dust Control (Non-Traffic Areas) – per surface acre [PX500]

150 - 300 gallons (0.0035 - 0.007 gal/sq ft) of PX500 (depending on severity of dust problem and lifespan requirements). Dilute PX500 at a ratio of 1:6 to 1:10 (one part of PX1000 polymer to 6 - 10 parts water).

Example dilution ratio: 1:6 at 150 gal of PX500 polymer per surface acre = 1050 gallons of total liquid to be applied per surface acre.

Apply with conventional spray equipment. Use large droplets.

Avoid spraying as a fine mist.

Dust & Erosion Control (Non-Traffic Areas) – per surface acre [PX500 polymer]

150 - 300 gallons (0.0035 - 0.007 gal/sq ft) of PX500 polymer emulsion (depending on severity of dust problem or anticipated severity of erosion and lifespan requirements)

Dilute PX500 ratio of 1:4 to 1:8 (one part of PX500 polymer to 4 – 8

Parts water)   

Example dilution ratio: 1:4 at 150 gal of PX500 polymer per surface acre = 750 gallons of total liquid to be applied per surface acre.

Apply with conventional spray equipment. Use large droplets.

Avoid spraying as a fine mist.

Dust & Erosion Control Driving Surface / Traffic – Ongoing Control program – per surface acre [PX500 polymer]

300 gallons (0.007 gal/sq ft) of PX500 polymer emulsion (primary

application)

200 gallons (0.005 gal/sq ft) of PX500 polymer emulsion (follow on - maintenance applications)

200 gallons (0.005 gal/sq ft) of PX500 polymer emulsion (touch-up applications where needed, as needed)

Dilute PX500 at a ratio of 1:3 to 1:6 (one part of PX500 to 3 to 6

Parts water)

Example: dilution ratio 1:3 at 300 gal of PX500/surface acre = 1,200 gallons of total liquid to be applied per surface acre

Vehicular use will break through the skin and adversely affect the performance of the application. Areas that will require any vehicular use should be retreated as damage occurs by creating an ongoing dust control program.

Capping Stockpiles (Control Sediment Run-Off & Prevent Dust) - per surface acre [PX500 polymer]

300 gallons (0.007 gal/sq ft) of PX500 polymer emulsion Dilute PX500 at a ratio of 1:4 to 1:8 (one part of PX500 to 4 - 8 parts of water). Dilution ratio may be adjusted for soil and climatic conditions.

           Example dilution ratio: 1:4 = 1,500 gallons of total liquid to be

           Applied per surface acre

          Apply with conventional spray equipment. Use large droplets. Avoid

          spraying as a fine mist.

Soil Stabilization with Renegotiation (Hydro-Seeding) - per surface acre

          65 - 150 gallons (0.0015 - 0.0028 gal/sq ft) of PX500 polymer        

          emulsion (depending on severity of slope)

         Dilute PX500 at a ratio of 1:9 to 1:12, depending upon soil granularity       

         and moisture content (one part of PX500 to 9 to 12 parts of water)

Example: dilution ratio 1:9 at 100 gal of PX500/surface acre = 1,000 gallons of total liquid to be applied per surface acre

           Wood fiber or cellulose fiber, fertilizer, seed as required - Mix and

           apply with hydro- seeder.

Coating of Coals, Cokes, and Metallic Ores (Minimizes Rainwater Penetration, Eliminates Freezing Problems in Winter) – per surface acre

          750 gallons (0.02 gal/sq ft) of PX500 polymer emulsion

Dilute PX500 at a ratio of 1:4 (one part of PX500 to 4 parts of water). Use the lowest dilution ratio that provides enough liquid for continuous skin/ coverage – this adjustment may be needed to increase total liquid on very irregular surfaces)

           Example: dilution ratio 1:4 = 3750 gallons of total liquid to be applied

           per surface acre. Apply with conventional spray equipment. Use large  

CLICK HERE TO RETURN TO MAIN PAGE